Gday all from Sydney Australia

Discussion in 'Introduce Yourself' started by Master Motorised Man, Jun 21, 2010.

  1. Hello to you all, my name is Devitt and from the land down under. My hobby and interst is building motorised bicycles and currently run a small business. I would like to see some interested sydney siders to meet occasionally and ride together. Looks like im going to get some good use out of this forum.

    cheers
     

  2. AussieSteve

    AussieSteve Active Member

    Hello Devitt from down under. I'm there too, in Nowra.
    Welcome to MBc.
    Where in Sydney are you?
    There are a few regulars from 'round there.

    What type of small business, out of interest?

    I see you have a Skyhawk. Which size, 48cc or 66cc and any pics yet?
    (Mine are a 66cc from ZBox and a ZBike Panther 200W electric. Pics here.)

    If you have any problems, sing out. There are many experienced owners here.
     
    Last edited: Jun 21, 2010
  3. gothicguy64

    gothicguy64 Member

    welcome from dull villawood ....
    ps i need help buildin a jackshaft kit .....


    brad
    nsw
     
  4. AussieSteve

    AussieSteve Active Member

    Brad, is that an SBP shift-kit, or do you want to make one from the ground up?
     
  5. gothicguy64

    gothicguy64 Member

    a full sbp jackshaft kit (h.d)
    expansion pipe
    low profile filter
    rock solid hp2 50 cc motor (2500 on clock)
    esperia eagle 20.5 inch frame ,front has disk
    thinkin of the trolley k mart now sells (150)
    rear gear of 14-28 , 7 spd
    no boost nor nos
    just good ole petrol an throttle ,,,,,,lol


    brad
    nsw
     
  6. locoWelder

    locoWelder Guest

    Welcome to MBc....:D
     
  7. nice ride


    Hi Steve, I currently sell motorised mountain bikes, cruisers and hybrids with motors. The new skyhawk is now 70cc and not 66, has slant head for improved compression. The pic is in my avatar but still awaiting approval i think as I am a new memeber. I like your ride, nice and clean , love the carby is that from rock solid ? do u reccomend the shift kit, what does it do Performance ?
     
  8. AussieSteve

    AussieSteve Active Member

    What's the name of your business?
    Got a website organised yet?
    We need more sellers here.

    The carb is a stock NT, (except it's re-jetted down to 0.72mm), with a low-profile air filter from Sick Bike Parts and the head is a Rock Solid Engines hi-comp billet head.
    Inlet is an alloy one with a DIY groove filed in it for an 'O' ring.
    Lots of other minor bits and pieces, dual-pull brake lever etc.
    Also got a SBP expansion chamber sitting here, but need to do a couple of other things first.

    The shift-kit is about the best mod I've done so far. Can get about 70kph in 6th on the dead-flat, or 80kph on a long downhill.
    Having said that, I usually do about 40kph, using 6th as a overdrive. Much better than having the little motor screaming it's head off.
    In 1st, it can putt along at walking pace without dramas.
    I fitted a Shimano MegaRange Superlow rear cluster for the extra-low 1st gear.

    You can post pics and links etc after a few posts. Forget how many.

    Right, I see what you mean. I think that your avatar should be visible.
    From memory, there's a box in the User CP that needs to be checked for the avatar to show.
    N.B. The 'Avatar' and 'Profile Picture' are two different things.
    When I joined, I remember that I uploaded a 'Profile Picture' thinking it was the avatar.

    >User CP >Settings and Options >Edit Avatar , then check 'Use Custom Avatar'.
     
    Last edited: Jun 22, 2010
  9. AussieSteve

    AussieSteve Active Member

    Some Pics

    Some pics of Devitt's bike:-
     

    Attached Files:

    Last edited: Jun 22, 2010
  10. Hey from Liverpool. What do you need a hand with ? have you got the kit already ?
     
  11. gothicguy64

    gothicguy64 Member

    hi
    waitin till next month to buy shift kit ,,,,i could run a 44 rear as is
    but ill wait till i get both kits
    shift/exhaust

    brad
    nsw
     
  12. gothicguy64

    gothicguy64 Member

    no i dont had the shift kit yet
    .
    ordering it next month


    brad
    villawood
     
  13. AussieSteve

    AussieSteve Active Member

    Finally got a chance to take a good look.
    Blue one's a nice, neat looking build, but you still need a big cushy seat. (Or I would, with my bony bum.)
    It looks like it's probably got enough room for a shift-kit, too.

    I like the black one as well. Interesting tank mount.
    Those forks are similar to the ones on my electric.
    Better seat on this one.
     
  14. AussieSteve

    AussieSteve Active Member

    Brad, when you get your shift-kit, as I mentioned, if you have any problems sing out.
     
Loading...