sp1ke
Member
hi can anyone tell me is the small end bearing the same on the 50 and 80 what are the diffrences if any i understand the 50 has a 10mm wristpin
i want to replace the std bearings as i hear they are rubish and frankly mine have to much play up n down as if no measurement went in to the design
main bearings are the same very loose to much play i understand they contract when hot so this might be normal
however i built loads of engines and that is dam slack if u ask me like not fit for purpose cheap nasty slack
ive read up on them here any advice on eather bearings would help i understand the adhc thingy on main bearings and the clearance thing but standard ones realy do seem nasty
i want to replace the std bearings as i hear they are rubish and frankly mine have to much play up n down as if no measurement went in to the design
main bearings are the same very loose to much play i understand they contract when hot so this might be normal
however i built loads of engines and that is dam slack if u ask me like not fit for purpose cheap nasty slack
ive read up on them here any advice on eather bearings would help i understand the adhc thingy on main bearings and the clearance thing but standard ones realy do seem nasty