Carby High Performance Carburettor Won't Fit

Discussion in '2-Stroke Engines' started by Wyatt Roe, Apr 18, 2013.

  1. Wyatt Roe

    Wyatt Roe New Member

    Hey everyone! I'm trying to figure out how I could possibly fit a new carby onto my existing setup. My current carby is causing a lot of problems such a broke choke, and leaking fuel.

    I wanted to install a high performance carby onto the bike, but there's simply not enough room to do so. Could anyone suggest something? IMG_0714.jpg IMG_0716.jpg

    The carby is currently on a lean (which isn't helping the situation) but It's the only wake I could make that one even fit >.<

  2. Fabian

    Fabian Well-Known Member

    If you want a much better system, do a Google search for:

    "Walbro Style Carburettor for Rock Solid Engines Reed Valve Intake"

    There are a bunch of installation photos which will give you an idea of the setup.
  3. Purple Haze

    Purple Haze Active Member

    There is an offset intake manifold, kinda shaped like a "Z" that I think will solve your problem. Available from many of the sponsors on this forum, or on ebay.
    nashy10 likes this.