Exhaust How Do I remove the engine exhaust studs?

Discussion in '2-Stroke Engines' started by StrontiumEthics, Apr 25, 2009.

  1. StrontiumEthics

    StrontiumEthics Motored Bikes Sponsor

    There are 2 studs that comes with on the engine to mount your exhaust, how do I remove them to put a bolt instead. I tryed using vicegrip but it doesnt budge. Its a pain b/c I got an expansion chamber and I gotta use bolts instead of studs.
     

  2. fetor56

    fetor56 Guest

    2 nuts(or more) locked together on the stud & undoe what way.If it's a really hard stud put it in a vice as low down on the stud as possible(be carefull not to snap the stud at engine level or your in deep poo)
     
  3. Junster

    Junster Member

    If they were installed with Loctite you may have to heat the stud with a propane torch then use your visegrips to back them out. That is if you don't care about ruining the threads. Just heat then twist you may have to do it a few times so you don't have to twist so hard as to snap one off.
     
Loading...