Kick Stand advice

Discussion in 'General Questions' started by Rockjaw, Apr 9, 2014.

  1. Rockjaw

    Rockjaw Member

    Hey all..I bought a kick stand for my shwinn 80cc..Sun Lite dual leg..it keeps falling down and is lop sided..there must be a better way to do this. Anyone have this kick stand?
     

  2. wheelbender6

    wheelbender6 Well-Known Member

    I have center stands (two legs) on my gas bike and e-bike. They never hold up the bike completely vertical. it always leans to one side a bit.
    You may need to add a second spring to your kick stand if it allows your bike to fall. Hardware stores usually carry a variety of tension springs.
     
  3. Rockjaw

    Rockjaw Member

    ok thanks..maybe i will try washers too
     
  4. Fabian

    Fabian Well-Known Member

  5. LR Jerry

    LR Jerry Well-Known Member

    It would've helped if you included a picture of your kick stand. I personally use a double kick stand which folds to the left side. Staton Inc sells the kind I have.
     
  6. sactownie

    sactownie Member

    I have the same exact center stand, the sunlite and it worked perfect on my marin MTB after adding SQUARE washers and longer bolt sourced from Osh Hardware to raise it up, I have another 2 washers Im going to add to the stack, I want the wheel up a little higher to make it easier to work on. doublecenterstand.jpg
     
Loading...