leave motor on changing rear tire

Discussion in 'Introduce Yourself' started by fishnbob1@yahoo.com, Sep 12, 2011.

  1. fishnbob1@yahoo.com

    fishnbob1@yahoo.com New Member

    just had a flat on my Currie trails bike , leave motor on tire and look at all 4 bolts your need to remove ....2 holding motor in place .. 2 holding axle ..let all air out of tire and tube ..cut all wire tighes and pull wheel back to you on motor side ..change tube or tire .. hope this helps
     

  2. PatrickW

    PatrickW Staff Member

    Welcome to MBc, Bob. Sounds like quite an ordeal. Good Luck.
     
Loading...