AussieJester
Member
- Local time
- 4:14 AM
- Joined
- Nov 25, 2008
- Messages
- 685
I'm a member over at RatRod bikes and i just spotted a picture
i thought might be of interest too those HT riders here, its of a modded
HT tank, heres the pic-->
http://i931.photobucket.com/albums/ad154/jezusjonz/Bikes/moondog4.jpg
the poster a one(jezusjonz) explained the method-->
"Just cut the filler neck off and move it to the side. Then weld a filler plate over where you removed the filler. Add a couple of tubes at the lower areas of the tanks for crossover. Mount them with the standard mounts."
I have asked if he has a worklog of the build if so i shall add a link to it here ASAP
KiM
i thought might be of interest too those HT riders here, its of a modded
HT tank, heres the pic-->
http://i931.photobucket.com/albums/ad154/jezusjonz/Bikes/moondog4.jpg
the poster a one(jezusjonz) explained the method-->
"Just cut the filler neck off and move it to the side. Then weld a filler plate over where you removed the filler. Add a couple of tubes at the lower areas of the tanks for crossover. Mount them with the standard mounts."
I have asked if he has a worklog of the build if so i shall add a link to it here ASAP
KiM
Last edited by a moderator: