my bike I just built.

Discussion in 'Photos & Bicycle Builds' started by john morrow, Sep 14, 2016.

  1. john morrow

    john morrow Member


  2. KCvale

    KCvale Motorized Bicycle Vendor

    Nice job.
     
  3. john morrow

    john morrow Member

  4. skyash

    skyash Active Member

    I like it but just seems strange not to have a wide back tire.its different
     
  5. john morrow

    john morrow Member

    Better ride, it's not a Schwinn occ stingray. Where I mount the motor is welded to the team not store bought. Thanks thought.
     
  6. john morrow

    john morrow Member

  7. john morrow

    john morrow Member

    The guy I bought the motor from put his sticker on the motor, but he is not the builder!
     
  8. JunkyardDog

    JunkyardDog Active Member

    I bought a bike just like that from Spooky Tooth a few years ago. It ended up being too small for me so I would up selling it.
     
  9. john morrow

    john morrow Member

    This bike is a 24in. the Schwinn occ stingray was a 20in
     
    Last edited: Sep 19, 2016
  10. JunkyardDog

    JunkyardDog Active Member

    It resembles an OCC Stingray, but it isn't. That frame was designed for 24" wheels and was also designed for a motor. Those lower tubes are there specifically to bolt a motor to. Am OCC fat rear tire will not fit in that frame.
     
  11. john morrow

    john morrow Member

    I Had a 3.5 back tire at one time. Once it blew I went with skinny back tire.
     
  12. Randall

    Randall Member

  13. john morrow

    john morrow Member

    Thanks, Randall I like the video.
     
    Randall likes this.
  14. Randall

    Randall Member

    Hey John, where did you get your double leg kick stand? I assume it's steel?
     
  15. JunkyardDog

    JunkyardDog Active Member

    Something similar came on the OCC bike. I believe it was some kind of pot metal. It was really irritating because it held the front wheel up in the air, ans let it flop to one side.
     
  16. KCvale

    KCvale Motorized Bicycle Vendor

    Hey John, did you ever put a caliper on that front disc brake so it actually works?
     
  17. john morrow

    john morrow Member

    Yes I put a brand new brake on front and drum on the back, it stops on a dime.
     
  18. john morrow

    john morrow Member

    Yes the stand is steel and I bought it from a man who said it was from Japan.
     
  19. KCvale

    KCvale Motorized Bicycle Vendor

    Good man ;-}
     
Loading...