My First Schwinn Build

Discussion in 'General Questions' started by Bobber23, Aug 9, 2009.

  1. Bobber23

    Bobber23 New Member

    Ok guys, so I'm new here, and I'm in the process of bulding my first Friction Drive MB, my donor bike is an old Schwinn Varsity 24", and I have most of the motor and clutch problems figured out, but one of my problems, is my roller, I have a setup similar to a shaft with 2 pillow block bearings on the end, and the shaft is only about 5/8, and I need to somehow attach something to it to make it either 1 1/4 or 1 1/2, do you guys have any ideas on how to do this, and what material would be best, also I know wet weather has an effect on which material, and I'll be riding in the dry about 99% of the time, so that isn't an issue

    Any Comments or ideas are gladly appreciated, and I'll post some pics of it tomorrow

    PS sorry for the long post
     

Loading...