NE5 is running good Thanks to all

Discussion in 'Whizzer Motorized Bicycles' started by old whizzer, Nov 15, 2008.

  1. old whizzer

    old whizzer New Member

    took Quintons advice and aligned the clutch to flywheel then deglazed shoes
    several times getting 90-95% contact then made small adjustments to carb.
    Have learned a lot reading posts on this site Stickeys are most helpful. Its cold but the sun is shining so I'm going riding. Thanks again
     

  2. RdKryton

    RdKryton Active Member

    Glad to hear it! Enjoy the ride

    Jim
     
  3. jbcruisin

    jbcruisin Member

    Hey Old Whizzer,
    Quenton & this forum Keep my bike running & keep it running fast. My bike would be sitting in a corner with a blown WC1 top end if I had never found this forum. Thanks to everyone here.
     
  4. KilroyCD

    KilroyCD Active Member

    Yes, if it wasn't for this forum, I'd probably be looking at some expensive repairs on my NE5 engine once the original lifters' soft ends mushroomed out. Even at 296 miles they were shot!
    :iagree:
     
Loading...