New Engine

Discussion in 'General Questions' started by tweakskater510, Aug 4, 2009.

  1. Just got a boy go fast engine
    i wanna deck this one out
    i know im gonna run a 34t on the back sprocket
    what else can i do
     

  2. give me vtec

    give me vtec Active Member

    in regards to what? Speed?
     
  3. give me vtec

    give me vtec Active Member

    what kind of bike are you using?
     
  4. that orange one i posted pics of awhile back
     
  5. give me vtec

    give me vtec Active Member

    ohh yeah I remember now... if the stock derailleur is in working order the best way to make the bike go faster would be a sick bikes shifter kit. It will let you take advantage of the taller gears by transferring the drive energy to the other side through a jackshaft to the stock bottom bracket.

    To make the engine perform better you can buy a better engine (the better quality engines are smoother and more powerful). You can replace the air filter with one of the sick bike replacements, you can replace the stock muffler with the high performance one from sick bikes as well. You can port match the intake tube to the intake port. You can also buy a better carb... cant really tell you which one because I haven't gotten that far yet. But all the other stuff I know is good from experience.

    I have heard you can mill down the head a couple of thousands of an inch by putting a piece of fine grit sand paper on a flat table, but I haven't tried that either.
     
    Last edited: Aug 5, 2009
  6. i polish my heads on my go peds will that do any good?
     
  7. give me vtec

    give me vtec Active Member

    where and what exactly would you polish?
     
  8. the walls of the head
     
  9. give me vtec

    give me vtec Active Member

    like honing the bore?
     
  10. i guesss what would happen if i lighten the cranks
     
  11. give me vtec

    give me vtec Active Member

    wouldn't start tinkering too much with the internals... there won't be much to gain there. I would start with the sick bikes jackshaft kit... I think you will be surprised how fast you can go. There is much more to gain with the extra gearing over modifying the internals. If you could find a way to go forced induction it might be worth it... that would be interesting huh? A turbo MB...
     
Loading...