new user got some questions

Discussion in 'Introduce Yourself' started by notsoqik, Aug 11, 2008.

  1. notsoqik

    notsoqik New Member

    Can some one answer some questions I have about a new 48cc kit?

  2. biketec

    biketec Member

    Sure what are your questions.
  3. srdavo

    srdavo Active Member

    Yes...we have answers. (most likely, the answers are already here.)

    ask away.

    Welcome to MBc.

    we try not to get to techie, here in the intros. But we'll point you in the right direction, or to the right person for the answers you need.
  4. notsoqik

    notsoqik New Member

    Have a 48cc kit and ran fine for about 10 hours. Now wont start after last couple of hours of hard to start spells seemed like it got progressively worse. Got a very minimal spark with plug out of hole and resting on fins. Probably not getting any spark under compression. Found a post with ohms readings to test mag and cdi. Mag tests good cdi open on 2 of 3 readings. Do these cdi open up frequently? Heard shorting out with kits kill switch is a bad idea. Talk to me, what do you guy's think?
  5. srdavo

    srdavo Active Member

  6. notsoqik

    notsoqik New Member

    Yes, tried a new plug. Same thing....