Clutch No idea what is happening...

Discussion in 'Transmission / Drivetrain' started by Decidium, May 23, 2014.

  1. Decidium

    Decidium New Member

    Hello guys,

    I am having a bit of trouble with (what I think is) my clutch. Lately I have been having to move the clutch arm closer and closer towards the carburetor which can't be good. And then, a few days ago it started to vibrate aggressively when I go over half throttle. It sounds like I am getting high rpm but it just won't stop vibrating and won't reach anything near its top speed (I can now only get it up to about 15-20kp/h) Do you guys have any ideas? I desperately need to get my bike working again as it is my primary mode of transport.
    Thanks heaps for the help!
     

  2. butre

    butre Well-Known Member

    open up the right side cover, make sure the flower nut is where its supposed to be. Also check that the clutch pads arent worn too badly.

    remember, those clutch pads might have asbestos fibers in them. don't take any real deep breaths of clutch dust.
     
  3. crassius

    crassius Well-Known Member

    also, grease the bucking bar well on the other side & make sure the screws holding the cover on are tight
     
Loading...