No spark!! help, please

Discussion in 'Electrical' started by andres1436, Nov 2, 2014.

  1. andres1436

    andres1436 New Member

    Hello everyone I'm new to the motor-bicycling community and am in the process of installing a 66/80cc two stroke China engine kit. Everything is going okay but have noticed I am not getting a spark. Plus the spark plug and spark plug cap look pretty crappy. I need help knowing how to wire these or what IMG_20141102_203504.jpg IMG_20141102_203422.jpg I need to replace. I took pictured for you guys to analyze. Thanks! IMG_20141102_203958.jpg IMG_20141102_203756.jpg IMG_20141102_203710.jpg IMG_20141102_203710.jpg IMG_20141102_203657.jpg IMG_20141102_203657.jpg IMG_20141102_203606.jpg IMG_20141102_203552.jpg IMG_20141102_203552.jpg
     
    Last edited: Nov 2, 2014

  2. Fast Shag

    Fast Shag Member

    First off, take the head off spark plug to revel threads. It will fit boot better. Wiring goes something like blue to blue black to black. don't use white. Kill switch either or to blue and black wires. (kill switch works by shorting out blue and black wires. If that doesn't work, check magneto for proper contact.
     
    andres1436 likes this.
  3. Fast Shag

    Fast Shag Member

    When ya get it figured all out, cut all wires and solder them! Those connections will fail on you.
     
    andres1436 likes this.
  4. andres1436

    andres1436 New Member

    thank you, i just removed and exposed the threads and is definitely a better fit. hopefully i get a spark i will check tomorrow.
     
Loading...