problem with cyclone 360w kit

Discussion in 'Electric Bicycles' started by trikome, Aug 2, 2008.

  1. trikome

    trikome New Member

    Hi everybody, and thanks for this cool forum,
    I have a question please, I've just put a cyclone 360w kit on my bike, with a lifepo4 10ah battery.
    I've often the motor who is cuting when I accelerate a bit or when I climb a hill, it stops, the batery leds on the throttle goes to the orange when it's stops and then it's starting again.
    Do you think this is a security or an electronic or electric problem?
    thanks in advance

  2. Peter

    Peter New Member

    Does the red LED light come on ? Does the motor start running again after you close the throttle ?

    It sounds like your battery voltage is sagging under load. A 24v10ah Lithium should be just enough battery if you are gentle on the throttle. If you don't have one already I recommend you get hold of a Cycle Analyist so you know what is happening electrically.

    Cyclone's will draw a lot more power than their rating while accellerating