Puch Moped drumbrake Hubs

Discussion in 'For Sale' started by dv8cam, Dec 12, 2010.

  1. dv8cam

    dv8cam Guest

    NEW Puch Peugeot Lelue Rear Moped drumbrake Hub. Complete NEW rear hub for any bike that has a Lelue 36 hole rear wheel. If you are putting this on a Puch, you will need to either reuse your brake plate, or come up with a creative cable stop on the swingarm. Sealed bearing set up. Include 36 tooth NEW sprocket (in gray) for drive side and 16 tooth NEW freewheel for pedal side. $50 plus $10 shipping or free deilvered in LA.

    Or for $70 plus $10 shipping, you can have a USED but very good condition matching Front Drumbrake PUCH hub. Brake shooes have 80% life & bearings spin nicely.

    These are very similar to the hubs that sportscarpat is using on his wheels. If you have rims that you want to use, jsut lacethem up and you are ready to go!
     

    Attached Files:


  2. chainmaker

    chainmaker Member

    What is the difference between a Lelue wheel and a regular dbl wall bicycle rim. I want this. How wide is it?

    Cheers
     
  3. dv8cam

    dv8cam Guest

    You will need to run 12 to 10 gauge spokes. They run 130mm wide. They will fit your rim or you can drill out the spoke holes. Ideal would be worksman rims if you are running a motor. Front fits basic 100mm width. You may have to sand/file down about 1-2mm of paint off the slot on the rear dropout so the axle threads don't scrape upon your first fitting
     
Loading...