Rebuild

Discussion in '2-Stroke Engines' started by Dylan.sparrow, Aug 16, 2015.

  1. Dylan.sparrow

    Dylan.sparrow New Member

    Hey guys. I'm thinking of doing a rebuild on my engine to see what my internals are like. Is there any kits or anything I can get to replace parts. If not name some of the things I may need.
     

  2. Dylan.sparrow

    Dylan.sparrow New Member

    Going to replace all bolts and studs with higher quality and retap them all
     
  3. crassius

    crassius Well-Known Member

    buy a new motor to put on bike while you mess with yours - you will probably learn a lot, but possibly have bad results
     
  4. Dylan.sparrow

    Dylan.sparrow New Member


    Not having a bike doesn't worry me to much as I have another mean of transport
     
  5. crassius

    crassius Well-Known Member

    normally, one doesn't really need anything to make it run - taking it apart and looking at things is how to find out if anything might benefit from replacement - back in the days before balanced cranks, it was a good idea to replace 4.8 grade mounting studs with 8.8 or 10.9, but not really important these days
     
Loading...