running with no clutch pads or the spinner covering them

Discussion in 'Transmission / Drivetrain' started by TREBOL JOSEPH A., Jul 11, 2013.

  1. TREBOL JOSEPH A.

    TREBOL JOSEPH A. New Member

    how can i get my bike started without clutch pads and the spinning cover over them?
     

  2. MotorBicycleRacing

    MotorBicycleRacing Well-Known Member

    No you can't and why would you want to do that?
     
  3. TREBOL JOSEPH A.

    TREBOL JOSEPH A. New Member

    I'm sure I can by turning the gears ir the thing on the other side attatched to it that spins. Is there a start up modification or way to spin the gears with a drill or anything to spin the gear or gears or spinning metal thing on the other side? I just want to get my piston going to run it.
     
  4. crassius

    crassius Well-Known Member

    you can spin the nut on the rotor with a big drill & a socket, but if your compression is high, you might strip the threads on the crank

    fitting a pull start unit would be safer
     
Loading...