Servicing a HT clutch

wrenchin 4 fun

Well-Known Member
Local time
5:03 AM
Joined
Jun 7, 2016
Messages
207
Decided to replace the pads on my trusty ole 66 cg. It's a good thing. They were petrified. Cleaned the parts and am ready to reinstall. Do I need to lube the bearings between the flywheel and the clutch gear? I know I need to put a small dab of grease on the gears. Thanks for the info.
 
It might help the Berings but it gets on the pads to then it slips. So probably no
 
Back
Top