Sherd bolt

Discussion in '2-Stroke Engines' started by vermhot, Nov 14, 2012.

  1. vermhot

    vermhot Member

    I have a motor with a bolt on the bottom of motor and was wondering if anyone had any good ideas to get it out ??!!! I was going to grind around it and get it out that way ,then JB weld the mess back together ! :shout:
     

  2. vermhot

    vermhot Member

    P.S. it snapped off flush with the case !!!!
     
  3. crassius

    crassius Well-Known Member

    your best chance to get it out cleanly is to carefully drill its center out & use an EZout tool to pull it

    check here for a lot of threads about how to do it
     
  4. vermhot

    vermhot Member

    I will give it a try this weekend !!!!!! And let you know how it goes !!!!!
     
  5. vermhot

    vermhot Member

    :tt1:Well I got it out !!!! Was not as bad as I thought it was going to be !!!!! Thank god for soft junk China metal !!!!!!!!
     
  6. snarlofdisgust

    snarlofdisgust New Member

    You can get replacement studs at ACE hardware for a couple bucks a piece. I replaced all of mine with the better quality ACE stuff.
     
  7. vermhot

    vermhot Member

    I have some SS hardware that I picked up , AlFisherman gave me some great advice awhile back and had picked up a bunch of threaded rod and SSd bolts an a heck of a lot better then the China crap !!!!!
     
Loading...