sprocket cover won't go on

Discussion in 'General Questions' started by Quinnmca, Apr 16, 2016.

  1. Quinnmca

    Quinnmca New Member

    I have a 66cc kit I bought from eBay and have new problems.... My biggest problem is that my clutch won't work, I can't even put the cover on the sprocket back on because the clutch arm is in the way and when I had it on the clutch arm wouldn't disengage the engine. I took off the clutch plate and spun the 3 prongs and that didn't work... Please help
     

  2. crassius

    crassius Well-Known Member

    if the problem is that the bucking bar sticks out too much, then tighten the flower nut more to pull in back some - to do this, you might have to use the 3 cover screws to push the bar in some to loosen the flower nut so you can turn it i farther
     
  3. Quinnmca

    Quinnmca New Member

    Thank you this worked!! Now my only problem is that there is no locking screw on the clutch arm. There is only a slit and no hole to hold the line In.
     
  4. crassius

    crassius Well-Known Member

Loading...