starfire 66/80cc first time startup.. no start

[mntexasborn]

Hi all, I recently purchased a grubee starfire 66/80 cc motor kit and have everything mounted and the bike should be ready to ride. unfortunatley i can not seem to get the motor to start. i've adjusted the clutch. checked fuel lines, spark plug is new. watch youtube videos but i still cant seem to get it to fire. any help would be awesome as i need this bike working yesterday

 

[namefail]

check the wires and make sure theyre connected right. the last kit i bought had the housing colors mixed up. might also be a throttle issue

 

[Hawaii_Ed]

start with the basics...pull the plug out and connect it, ground it to the engine and pedal it over, see if there is spark. My first kit had a bad kill switch, I disconnected it and it fired up. Spark is most likely the problem, but if you have spark, then you gotta look at the fuel system.

 

[GearNut]

This thread by fastboy9 may help you:
http://www.motoredbikes.com/showthread.php?t=9619