STOP PRESS: Sick Bike Parts insider information

Discussion in 'General Questions' started by Fabian, Mar 4, 2013.

  1. Fabian

    Fabian Well-Known Member

    I can barely contain myself as the mole i inserted deep into the skunk works at Sick Bike Parts has reported back, and as we speak is transmitting in Morse code via ham radio, so not to alert the SBP skunk work agents; know to be ruthless in making sure secret technical developments stay secret.

    I can't confirm the information as yet because spy photos are being transmitted in bit-map code, on a 28k modem (the sequester is affecting everyone these days), but suffice to say that the developments are worth the wait !!!

    I had a feeling that those guys were up to something; this clip best describes my delight:

     
    Last edited by a moderator: Dec 15, 2015

  2. darwin

    darwin Well-Known Member

    Me thinks you better clarify that post before they put you in a white jacket and give you free rent in a rubber room.
     
  3. Fabian

    Fabian Well-Known Member

    What's that, i hear knocking at the front door. If i just stay quiet they might go away...

    I'm telling you, my last name isn't "Manning" :sweatdrop:
     
  4. Skyliner70cc

    Skyliner70cc Active Member

    Ok, I'll bite...perhaps they will finally cave in and sell a chain tensioner for their shifter kits..
     
  5. Max-M

    Max-M Member

    Fabian: If I ever get to Melbourne, I'm gonna look you up. You're the man!

    So...what are the SBP lads up to?
     
  6. Fabian

    Fabian Well-Known Member

    As much as i want to give out information, i need to be very careful as it would expose the identity of the mole under deep cover in the SickBikeParts skunk works, but the below image might be a vital hint:

    [​IMG]
     
  7. Fabian

    Fabian Well-Known Member

    The mole has reported back that he has now gained information about a parallel development project at the SBP Skunkworks, but it's so tightly guarded that he doesn't have access to the information "as yet".

    2013 is going to be a great year !!!
     
  8. Fabian

    Fabian Well-Known Member

    @ Max-M

    Whenever you are in Melbourne, i am sure we can organise time to catch up over a cold bevvy.
     
  9. KCvale

    KCvale Motorized Bicycle Vendor

    (just smiles)
    I have been doing a lot of business with SIckBikeParts for 3 years, Paul (Pablo) is the business guy, Jim is the tech guy, but both are well versed in both aspects.

    I share what I do with their shift kit products and suggest improvements like a tensioner for the slack side of the pedal drive side so you don't have to move the motor like this for a 4-stroke shifter.

    [​IMG]

    If they are finally going to have a mount hole on 2-stroke shift kits and supply the spring loaded tensioner in the kit so you don't have to move the motor to account for chain and sprocket wear cool but that is what they do, they innovate and love idea's like mine from anyone.

    Anyway, I do have to smile at this topics TMZ insider slant and just about as entertaining ;-}
     
  10. Pablo

    Pablo Motored Bikes Sponsor

    It's a big mysterious world out there. Be careful.

    I keep the books. It's tax time, so don't bother the squirrel with a pencil. Already paid the state, waiting for the proverbial anvil to drop for the IRS.
     
  11. KCvale

    KCvale Motorized Bicycle Vendor

    hehehe, I'd like Jim's job better, I hate paperwork, I figured the two of would get a smile from this topic though ;-}
     
  12. Pablo

    Pablo Motored Bikes Sponsor

    It's funny but I have no idea what this thread is about. :whistling:

    Don't taze me bro.
     
  13. Fabian

    Fabian Well-Known Member

    Me neither :whistling:
     
  14. Fabian

    Fabian Well-Known Member

    But i've been advised to keep my trap shut :evilgrin:
     
  15. darwin

    darwin Well-Known Member

    They building a new mousetrap or what?
     
  16. KCvale

    KCvale Motorized Bicycle Vendor

    I think they may be on to that self-generating nuclear MB motor with right side CW drive the size of a pocket knife for only $50 and good for 10,000 miles and 100MPH before a refuel.

    Then again it could be that new line of intimate female apparel.

    (choke, cough, LMAO)! I have no idea either Pablo and Jim other than it is entertaining and maybe someone that didn't know about all the cool stuff you actually do carry at http://SickBikeParts.com might wander in and see the realistic real stuff you have.
     
  17. Fabian

    Fabian Well-Known Member

    Oh gosh, i can't contain myself.
    Great things are going to come out of the SickBikeParts skunk works, i can feel it in my bones...

     
    Last edited by a moderator: Dec 15, 2015
  18. Fabian

    Fabian Well-Known Member

    After weeks of receiving coded data from the mole i can now present one of the working prototypes; smuggled out of the research laboratory under cover of darkness and at great risk to those evading the almost impenetrable level of security deep within the SickBikeParts skunk works.

    I have also been informed that there is more to come but it's taken years of planning to set up this smuggling operation and the mole can't be too cautious as this working prototype is the first in a line of new systems to be smuggled out of the SickBikeParts Skunk Works.

    Please keep your voices down, and only discuss things in quiet; hushed tones.


    [​IMG]


    [​IMG]


    [​IMG]


    [​IMG]


    [​IMG]


    [​IMG]


    [​IMG]


    [​IMG]
     
  19. Fabian

    Fabian Well-Known Member

     
    Last edited by a moderator: Dec 15, 2015
  20. Skyliner70cc

    Skyliner70cc Active Member

    Nice, too bad its on the wrong side ;-)
     
Loading...