stud sizes?? help plz

Discussion in '2-Stroke Engines' started by brydonb, Jun 13, 2008.

  1. brydonb

    brydonb Member

    I am going to the store and have no idea of what size of studs I need for my 80cc chinese engine kit. The holes by my understanding for the exhaust and from motor mount are the same right? (the stud sizes I mean). If anyone knows the pitch of the thread, ( what thread size they are ) it would be greatky appreciated, thanx!!!
     

  2. brydonb

    brydonb Member

    so when i go to the store i ask for 6mm threaded rod and they will know what im talking about? on the website that im looking on of the store by my house has the following sizes

    1/4"
    5/16"
    3/4"
    3/8"
    5/8"
    1/2"

    can you help me out
     
  3. 6mm That's Metric.

    All the other you have listed (1/4"
    5/16"
    3/4"
    3/8"
    5/8"
    1/2")
    are American or standard thread.

    The easiest way is to bring a nut that threads on the stud correctly with you and have them match to the threaded rod .

    Bob

    BlueCollarBikes@Gmail.com
     
  4. I dont think you are going to find threaded rod locally, you might find bolts, nuts, etc. I have seen where members get rod or studs from someplace online call mcmaster carr.
     
  5. brydonb

    brydonb Member


    i can get threaded rod at windsor plywood in winnipeg, they have it on there website. :)
     
  6. There ya go. I would call them to check stock. I dont know how far away they are or where you are, but just because they show it on their website, they might not stock the metric sizes. Good luck....
     
  7. HoughMade

    HoughMade Guest

    Get a long enough bolt and cut the head off.
     
Loading...