I'm pretty sure I'm going to go a different route and use the right side to power the rear wheel so that means I'll have no use for the LHD threads I put on my hub. If you are building an OCC chopper and want this hub, I'll trade you my hub, straight-up, as long as yours is also black. I also have the original 44t chainring welded onto an ACS SouthPaw LHD freewheel I'll sell for $40 firm.
The hub has also been packed with Valvoline Durablend moly wheel bearing grease. I really recommend everyone pack their bearings with something similar, bicycle wheel bearings were not designed to deal with the heat generated by 50mph wheel speeds.
The hub has also been packed with Valvoline Durablend moly wheel bearing grease. I really recommend everyone pack their bearings with something similar, bicycle wheel bearings were not designed to deal with the heat generated by 50mph wheel speeds.
