unsure about my wiring! need help

Discussion in '2-Stroke Engines' started by tskrem, Nov 18, 2009.

  1. tskrem

    tskrem Member

    i am unsure about my wiring.... this is my bike and i had disconnected my wires for some reason and realized i had originally done it wrong. my instruction booklet is unclear and i am unsure.
    thanks.. all comments needed, i am a noob lol, ty
    also i have a feeling that my wires are different colored to everyone else's.
    pictures soon, the uploading is failing...
     

  2. AussieSteve

    AussieSteve Active Member

    What colour are your wires? That would help.
    Usually:-
    - blue from motor to blue on CDI
    - black from motor to black on CDI
    - white from motor to kill switch wire (yellow from memory)
    - green from kill switch to motor earth (or black from motor)
    and, of course, CDI HT lead to spark plug.
    ... Steve
     
  3. tskrem

    tskrem Member

    for some reason the uploading pictures of my wiring failed... 1 from the kill switch is red and yellow, and the other is green. did you say i can put the green wire in between the black wires? from motor?
    cheers
     
  4. AussieSteve

    AussieSteve Active Member

    You got it. You can either connect it, (the green wire), to motor ground or to the black wire which also goes to the CDI unit, (which I've done.) That's only the ground side. Connect the yellow/red wire to the white wire from the engine and you're done.
    ... Steve.
     
  5. tskrem

    tskrem Member

    thank you aussie steve!
     
Loading...