[URGENT] help with chain on new build

Discussion in 'General Questions' started by willwills90, May 27, 2015.

  1. willwills90

    willwills90 New Member

    hey guys, im building a mb with a chinky 2 stroke,

    the problem is, the chain keeps hitting the wheel when i try spinning it, also the train has a **** ton of slack, any ideas for getting rid of a couple of the connection things aswell,

    thanks
     

  2. crassius

    crassius Well-Known Member

    with a fat tire, one usually dishes the sprocket out rather than in - if 'connection things' are links, then a chain breaker is normally used
     
  3. NewOrleansFlyer

    NewOrleansFlyer New Member

    You can use a bench vice and a 5mm socket and a #3 Hex head driver tip if you don't have a chain breaker. Also, check your motor alignment. When you push you bike forward, there shouldn't be any thumping or any sound coming from the crank case. 2 strokes from China are typically referred to as China Girls....more of an FYI than anything else. Good luck.
     
  4. renegade2

    renegade2 New Member

    I've successfully removed links with a grinding head on a dremel.
     
Loading...