Walbro Carb Pulse Line

Discussion in 'Performance Mods' started by techtiger, Mar 31, 2013.

  1. techtiger

    techtiger New Member

    Can the pulse line be tapped into the intake rather than the crankcase? On the tock solid engine reed valve I was wondering if tapping that for a pulse line was possible so I can put a walbro carb on. My current bike is having some throttle issues with fuel statvation some four stroking as well as the fuel line being way too close to the heat of the motor.

  2. Fabian

    Fabian Well-Known Member

    It's an easy and simple procedure to set up the engine with a pulse feed line from the crankcase to operate a Walbro carburettor. The modification can be done with the engine installed in the bike.

    Do a search for "Walbro Style Carburettor for Rock Solid Engines Reed Valve Intake"