Carby Wanted: Picture of a HT with billet intake and CNS carb

Discussion in '2-Stroke Engines' started by Al.Fisherman, Mar 12, 2012.

  1. Al.Fisherman

    Al.Fisherman Active Member

    I need to build a clutch roller bracket. I would like a picture from the left side much like this picture. This shows a NT, but want one with a CNS.
    Thanks
    Ron
    [​IMG]
     

  2. bmoney

    bmoney New Member

    Here's my CNS carb mounted on a billet intake from pirate cycles..
    I know you were looking for a left side pic but this was the only clear close up i had. Hope it helps
     

    Attached Files:

  3. Al.Fisherman

    Al.Fisherman Active Member

    Thank you, but what I really need is a picture shot like this from the left side at the same level, but it's better then nothing. Can work with it if I have too. Thank you.
    Ron
    [​IMG]
     
    Last edited: Mar 13, 2012
  4. SdCruizer

    SdCruizer Member

    I have the cns with the other type filter
    just the whole carb itself is like 5 inches wide if that helps any
    I think the stock is around 3 inches

    if you need one of those offset intakes instead I have a unused one
     
  5. Al.Fisherman

    Al.Fisherman Active Member

    Don't need one TY. Have a customer that I'm making a part for. He has a HT, billet intake and a CNS carb. Need profile photo from the left side, like what I posted.
     
  6. bmoney

    bmoney New Member

    Still not as strait as yours but its in the ball park.
    [​IMG]
     
  7. Al.Fisherman

    Al.Fisherman Active Member

    Thank you very much, that's what I was looking for. Yes not a straight on shot, but can work with that.
     
    Last edited: Mar 14, 2012
  8. bmoney

    bmoney New Member

    Welcome, Glad I could help!
     
  9. vermhot

    vermhot Member

    javascript:void(0);
     
  10. vermhot

    vermhot Member

  11. Al.Fisherman

    Al.Fisherman Active Member

Loading...