For Sale

I got new subaru eh305 with new friction drive kit $375 cash pick up 714 785-4344

Hey everyone, this last winter I built up a Motoped using the kit as made by ShuttleBuddy. I finished it in the spring and promptly injured my knee fairly badly while riding it (my fault, bike was fine). After surgery and few months of rehab, I am able to ride it again, but fear I might again damage my delicate knee. So, with pressure from my spouse, I am forced to sell. The build cost more money than what I am asking. If you built one yourself you would come in over this amount. I am asking $3400 for the complete bike. Some spare parts are included, as well as the work stand, and a custom hitch mount carrier I made. The bike runs and rides great. It only has maybe 2 hours of riding on it with limited off road use. Here are...

Located in the USA too so shipping should be reasonable. https://www.ebay.com/itm/2-Unused-TAS-Tanaka-Bush-Cutter-Trimmer-TBC-373-37cc-ENGINE-Parts-NOT-complete/222990100468?epid=22019144676&hash=item33eb3ee7f4:g:nsEAAOSw6D1a8kjG

FREE SOLEX ENGINES. I have 4 solex engines built in China as described in the BGF Hongdu/Solex thread below. I am cleaning out my shop and would like to give them away. http://motorbicycling.com/showthread.php?t=27150 I purchased these engines new from a vendor in Canada. I mounted them on two different bikes as shown in the pictures attached. I have had a lot of fun with these engines adapting them to my bikes. They are very quiet and smooth. However, I have found the engines to be quite unreliable and require a lot of tinkering to keep them running well. I never did follow all of the modification suggested in the thread so that is probably the reason. This was my first experience with motor bicycling and was hooked after my...

So, I have a HS-142F mountain bike, 500W ebike, and a 250cc motorcycle. I think its time to consolidate all three into just one bike. So, I am planning to sell off the HS-142F and motorcycle first and use the ebike to get around and then use the batteries from the 500W ebike into a new fat tire hybrid motorized bike (hybrid = reverse gearbox HS-142F and 750W+ geared hub motor) that you guys are going to love. The HS-142F is a reliable but ugly bike. It is 3 years old and has 3000+ miles on it and at places held together by hose clamps... It is loud not sure why; I just don't have time to look and I like riding the ebike more. I don't want to sell someone a lemon but it is still a good bike, reliable (2 pulls and low warm up time), and...

Hi. I am selling brand new 4-stroke 49cc 4G Tbelt Engine kit. It is brand new and I javen't used it once. I can't return it to the company I bought from due to no-returns policy on the kits. I was supposed to do a cross America bike trip but I changed my mind in the last minute and go home instead. Link for kit description below: https://www.bicycle-engines.com/49cc-4g-t-belt-drive-complete-gas-powered-engine-kit/ Comes in the original box, recipt ,installation guide and some spare parts I bought in addition to the kit Flaxible on the price. It cost me 386$ I am located in San franscico but can come to Sacramento or LA as well. I also can ship it to wherever you are at. My email: gbonfil22@gmail.com My phone number: 2092808827

This bike features 21 Gas Powered Gears, thanks to the Sick Bike Parts Jack Shaft Kit. It has a 66cc Flying Horse Motor. The frame is a full suspension GT LTS. All of the "Gas Bike" components are brand new, with the frame being lightly used. Going to run this as an auction for 24 hours after the reserve is met, or until the buyout is reached. Reserve is $2,500.00 USD. Buyout is $3,500.00 USD. Seller pays shipping. I accept paypal for payment. Any questions or comments are welcome. http://www.gasbikeproject.com

Hello all, i have ( 2 ) Nacho Libre Trikes for sale! located in the Chicagoland area. Please contact me for more info. Thanks https://chicago.craigslist.org/chc/mcy/5428065934.html

I have a Motoped for sale including chain sprockets and air filter that looks just amazing. It runs great and has no problem what so ever. It has a Pitster Pro 155 cc Z H-O Engine with manual 0-1-2-3-4 gears which is powerfully strong that goes up to 75mph with upgraded : Muffler Air filter Clutch lever $2995 Please, if interested text me at 559 455 7193! you can check its performing below ! http://m.youtube.com/watch?v=0pf82tr6kH4

http://www.gasbike.net/skyhawk-gt2a-bike-frame.html

I have enjoyed my motorized bicycle experience, but I a now graduating to motorcycling and need the room for my Honda Magna. My bike for sale has a good engine, and everything works properly. It's in great shape, and reaches 30-35mph easily. Along with it is various motorized kit parts such as: 1. New, never used 80cc 2-stroke engine, 2. Tank 3. Various carb parts 4. Custom King's 36 tooth sprocket, never used 5. Solid hub and freewheel sprocket that can be used with 4-stroke engines. 6. miscellaneous cables, hoses, springs that are used with these bikes. I would like $300 for all of it, and I really just want to deal locally here in the DFW/Texas area if at all possible. Contact me if interested. Pics of...

The Buy/Sell/Trade forum is for your items/needs only. I appreciate all the great finds on CL & Ebay posted here....... But...... Craigslist & Ebay ads expire & We end up with a ton of threads with dead links, after a short time. By posting CL & Ebay links in this thread, this will keep the fresh finds at the top of this thread & fewer dead threads later. Thank you for your cooperation. Dave

After gathering info here and poking around the internet and biding on (and losing) a few small motorcycle tanks on eBay, I found a great tank for my bike. (These are not my tanks and I am not getting anything out if promoting them. I am just passing along the info.) Check out Pagsta gas tanks on eBay- http://cgi.ebay.com/ebaymotors/PAGSTA-MINI-CHOPPER-MOTORCYCLE-CUSTOM-GAS-FUEL-TANK_W0QQcmdZViewItemQQhashZitem518bf0f5b1QQitemZ350240175537QQptZMotorcyclesQ5fPartsQ5fAccessories They are metal tanks and have a nice decal and good paint on them. After researching Mini Chopper on the Pagsta website I believe these are 6 liters tanks or 1.58 gallons. The tank is a steal at $25 but the catch is that they don't come with a fuel cap...

I have some new Subaru EH035 engines for sale. These engines were still packed in their sealed carton from Subaru which I personally opened. They came from a company that had gone out of business. I only wanted a few engines for myself, but I ended up purchasing the entire lot. These engines do not come with fuel tanks. The original intended application for them was for a product that used a separately mounted tank. The engines come with an owner's manual and plug wrench as shown. You can find additional information on the Subaru EH035 engine at the Subaru website: http://www.subarupower.com/pfeatures.aspx?pid=49 I am offering these engines for $145 each. Shipping via FedEx Ground (about the cheapest and fairly...

I know that there are many out there that can make these on their own. This is for those that can't for what ever the reason. This is a bolt on mod. This roller bracket will enable the rider to disengage the clutch with minimal effort. Once installed, the clutch can be disengaged with one (1) finger, the pinkie at that. On my bike I can disengage the clutch using 6# test mono fishing line. These come with a 100% satisfaction guarentee...all you have to say is I want my money back...PERIOD..that is how good these are. These are hand made by me. I use 3/4" angle iron, steel ball bearing roller, and grade 8.8 mounting hardware. Painted to either Silver, or Black. The only part that is not included in this mod is the cable case...

http://www.ebay.com/itm/Lifan-Engine-1-5-HP-OHV-35cc-Mini-4-Stroke-LF139F-/390659988353?pt=LH_DefaultDomain_0&hash=item5af5265b81

I have a 42 Safticycle and looking for a leaf spring fork for it. Anyone have one for sale or know where to buy one? Dave

If anyone is doing a chopper build I have the motor mounts available for $39.99 plus shipping. Email; frankpt1754@aol.com

Well, after a few years of motorized bike experience and building countless kits, I've always had a problem with the crappy gaskets they come with, they would always either rip on me whenever I needed to remove the cylinder or intake or they were soo thin that it wouldn't seal properly even when cranking down on the bolts as hard as possible. Sooo, I decided to make my own! There cut on my CNC cutter and quality checked by yours truly, I use the best material's that I can find (fel-pro) The rubberized cork gasket and the Karropak withstands the bend test with flying colors! I'm currently offering these gaskets for the intake as well as the base gasket. You get 2 Karropak base gaskets and rubberized cork base gasket as well as 2...

All engine upgrades by Quenton Guenther. Chrome luggage rack, chrome air cleaner, chrome battery cover, chrome belt cover, new tires with thorn proof tubes, rear axle kickstand, motorcycle risers and handlebars (original goosekneck and handlebars go with bike). New handlebars and rear axle kickstand not shown in photos. Starts first kick and purrs like a kitten. Everything works, but battery is 4 years old and probably needs replacement. Very dependable and a blast to ride, but too many projects and bikes. Black saddlebags NOT included in sale. Asking $1500 or trade for small Italian or other vintage MC. Pickup only, no shipping. PM me for details.