Robot/goped guy

[spad4me]

That would be me .
Just want to meet some one who can do.
As far as gopeds go captured by robots can do .

Maybe as well as motorized bicycles.

 

[datz510]

Wicked band!!

Don't let the robots push you around too much...

You'll fit in perfectly here!

 

[capturedbyrobots]

It's nice to be welcomed again , even though I've been
here for more than 6 months and have built 1 mb already...
But... Thanks again everyone.
The band is on hiatus until next year, so i'm just playing with my motorized toys.

 

[spad4me]

I believe that i want to build a motorized bicycle based on your goped

No kidding. Please PM me.
I would like to ask you some questions about a cvt on a motorized bicycle.

I will build one based upon your posted designs.
Have a good day

 

[capturedbyrobots]

No kidding. Please PM me.
I would like to ask you some questions about a cvt on a motorized bicycle.

I will build one based upon your posted designs.
Have a good day

I haven't done it for a bike yet,
as the gear ratio issue is wrong. It's easy with a 10 inch goped wheel.
Not so easy with a 26 incher. Gotta get the gear ratio right first.
I'm working on it now.

 

[davidsis]

Cool, you will really love the motorized bicycles. How fast does scooter go?

 

[capturedbyrobots]

Cool, you will really love the motorized bicycles. How fast does scooter go?

I know, I already do.
Remember, I already made one and have been a member since January.
I posted a thread about my MB in " rack mount" long ago.
http://www.motoredbikes.com/showthread.php?t=8670


My CVT goped runs about 40.
My MB with a 40 cc tanaka scrubber drive runs about 35ish.

 

[spad4me]

I haven't done it for a bike yet,
as the gear ratio issue is wrong. It's easy with a 10 inch goped wheel.
Not so easy with a 26 incher. Gotta get the gear ratio right first.
I'm working on it now.

A happy time has a 4 to 1 jackshaft built in.
Engine rpm about 6,000.
Then a huge reduction through the jackshaft.
The driven sprocket is a ten tooth driving a 415 or .81 BMX chain.
Final sprocket size is usually 44 tooth.