Hi from whowhere, Ontario, Canada

whowhere

New Member
Local time
9:46 PM
Joined
Jul 22, 2008
Messages
23
Hi All,

I am about to receive a boygofast HT 80cc kit.

It's in Toronto, so its close. I have heard mixed information on these kits, but the price was right. Any helpful info is most appreciated. I tried buying the 4 stroke over the wheel kits but those deals to my disappointment fell apart.

Regards.
 
Welcome to the group :) With the engine being 80cc's, does Ontario need you to register it?


Thanks,:)

The short of it would be yes. Any gas motorized vehicle is required to be registered and insured in Ontario. Ontario has a pilot program for electic bicycles only, which requires no registration or license.

Whether a motor is 30 cc or 80 cc makes no difference it's still not allowed. Regardless is that reason enough for me not get one? To me no.
 
Thanks,:)

The short of it would be yes. Any gas motorized vehicle is required to be registered and insured in Ontario. Ontario has a pilot program for electic bicycles only, which requires no registration or license.

Whether a motor is 30 cc or 80 cc makes no difference it's still not allowed. Regardless is that reason enough for me not get one? To me no.

I agree with you on the rationale that (1) it's a free country; (2) it's in the pursuit of happiness.
 
NOT Working out!!!!! Learning the hard way.

I was happy I got it all together. I did one thing wrong. I put the carburator in sideways, so it was leaking fuel. The motor did fire up a few times but wouldn't stay running. I kept going around the block to try and get it running. My chain jumped off the motorside sprocket and this caused it to lock up. I noticed it was leaking fuel. I thought this can't be right, then I realized my Carburetor was not on properly. I put the carburator on properely, checked the torque on the head bolts, and replaced the sparkplug as recommended in this forum with no difference.

Question????

If the motor was not getting the fuel/oil mixture and the motor was trying to be started without fuel/oil would this damage the motor?

Anyone know what the compression should be for this motor?

I like the design of this motor and how the motor mounts inside the frame but the quality of the components and the buttons/levers is substandard. Even if I had this motor working I would be nervous about the quality of the components holding up.

It is obvious I am going to have to become an expert to make this work. I am determined to get this motor working, even if I have to tear it apart and put it back together piece by piece to find the problem. I am not having good luck in my quest to have a motorized bicycle.:devilish: I guess I will be saving my spare cash and try ordering a blackstar direct motor from Australia.
 
whowhere where in ontario are you i may be able to come help you and no you don't need to register it aslong as you admit to 49cc only i have had a lot of talks with police here in niagara falls and they all say i'm perfectly legal cause of the hand operated clutch it is NOT a moped so you should be good to go like i said if i can help i'd be glad to
 
Back
Top