Mikuni Carburetors (mad video)

[misteright1_99]

I recieved a reply back from the guy in the video zboxfreak7.


Re: Mikuni
Hi,

The mikuni carb on our bike is a 16 mm and is necked to a standard manifold of 16 mm internal diameter. Main jet is a 90. Pilot jet is a 15. Slide cutaway is a 2. I think.
We are running a 48cc Zbox motor. Port area & timing has been modified also. Exhaust is standard.

What kind of bike & motor are you running?
If possible send a photo!


I sent him the MBc Link...........

 

[Ozi]

Cool , every member send him a photo of their bike

 

[arielatom300heps]

I recieved a reply back from the guy in the video zboxfreak7.


Re: Mikuni
Hi,

The mikuni carb on our bike is a 16 mm and is necked to a standard manifold of 16 mm internal diameter. Main jet is a 90. Pilot jet is a 15. Slide cutaway is a 2. I think.
We are running a 48cc Zbox motor. Port area & timing has been modified also. Exhaust is standard.

What kind of bike & motor are you running?
If possible send a photo!


I sent him the MBc Link...........

Thanks for that update on the Mikuni carb misteright1_99. If I end up getting a Mikuni carby I think it will be the 16mm as it will be easier to tune.