Dude, (I could be wrong, but it looks like) your air intake (black plastic thing on the back of your carb) is up-side-down
2 stroke chinese miscellaneous
- Thread starter solitus3989
- Start date
Dude, (I could be wrong, but it looks like) your air intake (black plastic thing on the back of your carb) is up-side-down
Skyliner70cc
Active Member
- Local time
- 4:32 PM
- Joined
- Nov 17, 2007
- Messages
- 1,338
I'll answer for solitus. On many installs, its the only way to get the carb to fit with an air filter. I've had several builds like this and don't consider it unusual if intentional.
solitus3989
Member
bingo. didn't fit down, so i put it up. no big deal... it's still sucking in air. that things only use is to make sure you don't suck a leaf in.
HERPER
Member
Ive got the same engine. i had a few problems of my own.
1. how did you get the kill switch to work. nothing was working for me. the white wire and such
2. i have a coaster brake that totally burnt out and ate **** and was wondering how to convert my hub to a freewheel one. any ideas? thanks
other than that the thing runs awesome
1. how did you get the kill switch to work. nothing was working for me. the white wire and such
2. i have a coaster brake that totally burnt out and ate **** and was wondering how to convert my hub to a freewheel one. any ideas? thanks
other than that the thing runs awesome
sparky
Active Member
1) go down to the "modding 101" section here, and check out the toggled anti-theft kill switches..... http://www.motoredbikes.com/showthread.php?t=10392
2) Two ways I know of. Only person I know that sells freewheeled hubs are boygofast. I'd rather go with the freewheeled crank from www.sickbikeparts.com tho.
