MasterLink
Member
This might be a issue with the Grubee Gearbox
(Grubee box)
have you guys seen this issue the ball bearings fall out i have about 5 missing in this final drive / jack shaft and there was play in the sprocket i took it apart and after closer look i see that its all held together with screwing it together the races. now there is a bolt on the back of the gear that i always check for tightness ...and its stayed tight and somehow i have lost some bearings and its made it sloppy there is a key in there that i put on the shaft but it power now is not goin to the chain .... does anyone no where the wooddrift key gos i took it out under the race but i dont see how to get it back in there well i might have to load the bearings and the key on the shaft dos'nt seem right ..but thats the only thing i can think of i put that key on the shaft then put the gear on that shaft but thats not working ....there has to be a trick iam not seeing yet any help in this matter thanks in advance
ps as you can see in the fdive pic that brass looking washer thingy is really the back of the race and is a reverse thread and didnt stay tight on mine it can be adjusted i think the bolt dosnt keep it tight there are 2 indentions in it for a tool to tighten it
(Grubee box)
have you guys seen this issue the ball bearings fall out i have about 5 missing in this final drive / jack shaft and there was play in the sprocket i took it apart and after closer look i see that its all held together with screwing it together the races. now there is a bolt on the back of the gear that i always check for tightness ...and its stayed tight and somehow i have lost some bearings and its made it sloppy there is a key in there that i put on the shaft but it power now is not goin to the chain .... does anyone no where the wooddrift key gos i took it out under the race but i dont see how to get it back in there well i might have to load the bearings and the key on the shaft dos'nt seem right ..but thats the only thing i can think of i put that key on the shaft then put the gear on that shaft but thats not working ....there has to be a trick iam not seeing yet any help in this matter thanks in advance
ps as you can see in the fdive pic that brass looking washer thingy is really the back of the race and is a reverse thread and didnt stay tight on mine it can be adjusted i think the bolt dosnt keep it tight there are 2 indentions in it for a tool to tighten it
Attachments
Last edited: