Mini Moto Exhaust

[viftamedhandera]

Hello,

I am wondering if i can use one the following, instead of the stock exhaust?

1) http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&Item=200261486032&Category=25640&_trksid=p3907.m29

2)http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&Item=190256517232&Category=11332&_trksid=p3907.m29

And I would like to know if this carb would fit

http://cgi.ebay.co.uk/Mini-Moto-CAR...39:1|66:2|65:12|240:1318&_trksid=p3286.c0.m14

Any Help on these would be great thanks
Ben

 

[fireball_jones]

you need to give us engine spec.

ps that second place i have bought stufff from there they seem ok. give them a call?

 

[Ghost0]

In my opinion I would choose this one.
http://cgi.ebay.co.uk/Mini-Moto-PER...photoQQcmdZViewItemQQ_trksidZp1713.m153.l1262
or
http://cgi.ebay.co.uk/Mini-Moto-EXH...photoQQcmdZViewItemQQ_trksidZp1713.m153.l1262
You can use your stock header and adapt the pipe with a silicone coupler and hose clamps. This is assuming you are running a chinese 2 stroke. I wouldn't worry about the carb but just jet the stock one correctly.

 

[alex]

I used this pipe, and I am very happy with it.
http://cgi.ebay.com/X1-X2-POCKET-BI...0644809QQcmdZViewItem?_trksid=p3286.m20.l1116

 

[mechcd]

Don't even think about #1. I got one for my engine and it was terrible. The stinger was clogged up with slag, the single baffle in it was completely loose, and it didn't really quiet it down any once i fixed it.

I now have the second one in Ghost0's post.

http://cgi.ebay.co.uk/Mini-Moto-EXH...photoQQcmdZViewItemQQ_trksidZp1713.m153.l1262

I haven't fired it up yet, but it actually has a glasspack silencer (with fiberglass in it!). It looks like it would be pretty easy to slip the stock silencer off, and put a new larger diameter one. Just pop the cotter pin out and put the new one on.

 

[fastboy9]

Yep I have that pipe too, It is definetely a good upgrade, Looks great too! compared to the normal mini moto pipes,
It is loud though, but sounds nicer than stock. But the silencer is of very basic construction, which is a good thing, because it would be pretty simple to make a more quiet one.

 

[misteright1_99]

Don't even think about #1. I got one for my engine and it was terrible. The stinger was clogged up with slag, the single baffle in it was completely loose, and it didn't really quiet it down any once i fixed it.

I now have the second one in Ghost0's post.

http://cgi.ebay.co.uk/Mini-Moto-EXH...photoQQcmdZViewItemQQ_trksidZp1713.m153.l1262

I haven't fired it up yet, but it actually has a glasspack silencer (with fiberglass in it!). It looks like it would be pretty easy to slip the stock silencer off, and put a new larger diameter one. Just pop the cotter pin out and put the new one on.

I also have a pipe like that, and did slip the stock silencer off and made a larger one to quiet it down...........

 

[misteright1_99]

Fastboy Here is a pic, and you have a PM. Good luck.........

 

[fastboy9]

very nice indeed, I'll have a go at that at the weekend.
Thanks!
Fastboy

 

[QuadManiac]

Fastboy Here is a pic, and you have a PM. Good luck.........

How bout a pic of the other end?