Tires Tire Truth

mikem

Member
Local time
7:51 AM
Joined
Nov 21, 2008
Messages
124
Location
Michigan
I've been looking through past threads for THE BEST "no-flats" bike tire. Found lots of good info but couldn't find any real consensus. I'm hoping a lot of the experienced riders out there might mention their ...

1) Favorite Tire
2) Favorite Tube
3) Tire Tips, Tricks & Stories

Getting all this info in one spot could really help keep a lot of us from walking home.
?
 
1) Favorite Tire
==========
Shadow Conspiracy Undertaker Folding Tire 20"x1.95"
They should definitely make this tire for larger tires, but they don't. Bummer.

2) Favorite Tube
==========
Any puncture/thorn-resistant or heavy-duty tube.

3) Tire Tips, Tricks & Stories
==========
Use liners on both sides of the tubes. I had 3 sharp metal objects in my rear tire before the tube blew from a very large nail. Still no flat in the front, and I only have the stock tube that came with the bike. Also, don't use slime [tubes] or fix-a-flat. This might be worth looking into, but I don't see it as being too economical since the liners are working well enough with regular tubes.
 
i just started a thread the other day about putting a 26x2.00 tire inside a 26x2.25 tire with a tube.thats the way to go in my opinion.
 
What has worked well for me is the solid polyurethane airless No-More-Flats inner tubes with regular 26 x 1.95 tires for the best fit. Only drawbacks are the increased weight, and more resistance when pedaling, but with an engine and high speeds, that doesn't matter much, and I love that I never worry about tire pressure anymore.

For lighter weight, eastwoodo4's double tire IMO would be the way to go if not going airless.
 
Well, I'm gonna be the black sheep on this one.

But I'd advise that you buy whatever tire you can find cheap, quick and easy.

Carry a few spare tubes and a $20.00, 12 volt inflator.

I've gotten along just fine using this method for many years. I usually carry tube patch kits as well, but I rarely bother to use them. I just slap in a new tube and go.
 
I just bought 2 new tire tubes for a build I just finished and was very impressed by them. These tire tubes were 5 times thicker than regular tubes and had slime. They were very heavy so not something for the weight conscious but I suspect they will lastl a long time. They were available at Walmart.
 
i just started a thread the other day about putting a 26x2.00 tire inside a 26x2.25 tire with a tube.thats the way to go in my opinion.

Before I started using $10 puncture proofs and tire liners, I tried this trick, and doubled up duct tape....I was unfortunately surprised how much abrasion takes place in that tire, especially at the 30 mile speeds we hit. A standard $2 tube doesn't stand a chance.

$6 slimes are okay for the front/easier removal on the road, but not worth it on the back. For slimes to really work, I think you have to spin the wheel for 15 minutes to spread out the goooo. Wal-Mart has a slime/punctureproof combo for $10, my Pyramid bike shop brand is minus the slime.

I'm now rolling 4-5 layers of electric tape over the rubber gasket atop the spoke ends, plus the puncture proofs and tire liners.

My bike shop has found a new supplier for tires, but hasn't gotten up an order yet, he says they run about $25. Claims the rubber width in the center of the tire is nearly double, if nothing else, I'll use them on all my rears wheels.

A customer came across a fire sale at K-Mart, where the 2.2.5 Kendras, normally $12, were marked at $2, and he grabbed up about 15 of them, which we split up between us.
 
Tire Sealer

1) Favorite Tire
==========
Shadow Conspiracy Undertaker Folding Tire 20"x1.95"
They should definitely make this tire for larger tires, but they don't. Bummer.

2) Favorite Tube
==========
Any puncture/thorn-resistant or heavy-duty tube.

3) Tire Tips, Tricks & Stories
==========
Use liners on both sides of the tubes. I had 3 sharp metal objects in my rear tire before the tube blew from a very large nail. Still no flat in the front, and I only have the stock tube that came with the bike. Also, don't use slime [tubes] or fix-a-flat. This might be worth looking into, but I don't see it as being too economical since the liners are working well enough with regular tubes.

Sparky,

Thanks for the tips ... and for this link to your previous thread:

http://www.motoredbikes.com/showpost.php?p=166549&postcount=20

Very interesting stuff. :geek:
 
Last edited:
Back
Top