different fuel and mixture

Lonewolf

New Member
Local time
10:32 PM
Joined
Feb 9, 2009
Messages
15
Location
North CarolinA
I have about 300 miles on MB but it didn't run as good as I thought it should. I adjusted needle positions and what not. It ran smooth just seemed sluggish. No way to control the air flow! I mixed up some 93 octane with 25:1 synthetic and now it runs like I hoped it would. No faster, just better acceleration and idling.
 
What kind of motor? Is it a high compression? That would explain the need for higher octane.

That's very interesting because most chinese motors are built for ~87 octane, or just regular old gas that you would put in a weedeater.

I tried premium in my motor and it ran like a champ but it was extremely hard to start (pull start only). So now I only use regular and it still runs almost as good (I lose about 500 rpm), but I'm on a shifter so its all good :p
 
makes one wonder

That's very interesting because most chinese motors are built for ~87 octane, or just regular old gas that you would put in a weedeater.

makes one wonder
if that's what they call for from the factory
why do we always wish for more ??

notice I say (((we))) that includes me
I have done the same THING -- more than once !!

have fun as you ride that MB thing
 
Back
Top