My EZM Test

RusticoRay

Member
Local time
11:47 AM
Joined
Aug 20, 2008
Messages
223
Location
6mi. from Old North Bridge
A small test of the horsemanure thats going on.
 

Attachments

  • 1e.jpg
    1e.jpg
    149.6 KB · Views: 489
I will not go into detail about the device, but let me just say that it is something that shapes belt to allow for smooth clutch engagement as well as proper disengagement. That's all I shall say at this point.

i think he was talking about this horse manure.and it looks like he got his hands on one.
 
Is that the Huasheng engine? Do they come through with a cooling shroud and if so how is the engine cooling without it? Also wondering what the exhaust pipe is made of... as in if it is made from some kind of conduit readily available....and if it has the spiral ridges on the interior as well? Thanks.
 
to see how long it takes for people to complain would be my guess
oooh, infraction points !!!

ps...no more pics of my EZM - Jag will be posted
I have many...e-mail if you want :)
 
HappyValley,
yes that is a HuaSheng
it needs the cooling shroud attached (have heard exhaust valve will burn up without it)
the pipe is flexible and rustproof with ridges inside and out
I have heard it sounds very nice and adds power (I need a short pipe for pulling the girls/trailer)
available from any EZM dealer
 
eastwood
the 'dis-engager' pin works very well
the use of it is what makes the design patentable

sorry for jumpin all over your thread Ray :cool:
 
Back
Top