Need Alot Of Help,
- Thread starter rifka83
- Start date
F
fetor56
Guest
Connect the open Y part of the black wire to one side of the kill switch and the other side to ANY earth(ground) source(engine/frame,it doesn't matter as long as there is an uninterrupted circuit between the two)
Using the kill switch shorts-out the electrical system & that's fine....it's meant for it.
If u like u can test this by starting your engine(first reconnect that little switch box) & touch the bare part of the black wire to your engine.....it'll die.
Using the kill switch shorts-out the electrical system & that's fine....it's meant for it.
If u like u can test this by starting your engine(first reconnect that little switch box) & touch the bare part of the black wire to your engine.....it'll die.
F
fetor56
Guest
BTW...tank looks ok...not sure of the BE.com/Grubee setup but u should be using the fuel line that has a filter at the end of it.
Umm.. my Kill switch has 2 wires...
Its 145 am I just got home from a 14 hr work day... *signs*
Ok I got a idea so ill Get back after I get up from sleping a little...
working on the motorbike with no sleep is not good at anymeans....
O and by the way the company I got my bike kit from
http://www.bicycle-engines.com/
STILL WONT ANSWER ANY CALLS , well i get a human but no Tech Support,
and still no answers to any of my emails....
*pouts*
""fetor56"" You are the best....
Thanks for the help,
Its 145 am I just got home from a 14 hr work day... *signs*
Ok I got a idea so ill Get back after I get up from sleping a little...
working on the motorbike with no sleep is not good at anymeans....
O and by the way the company I got my bike kit from
http://www.bicycle-engines.com/
STILL WONT ANSWER ANY CALLS , well i get a human but no Tech Support,
and still no answers to any of my emails....
*pouts*
""fetor56"" You are the best....
Thanks for the help,
F
fetor56
Guest
"working on the motorbike with no sleep is not good at anymeans"
More than that it's a recipe for disaster....no sleep/bad mood/rushing, & before u know it
More than that it's a recipe for disaster....no sleep/bad mood/rushing, & before u know it
ok ((((THE KILL SWITCH WORKS ))) YAY.. *does happy dance*
This is the motor with Tanny on the Mount...
now my wonderfull from http://www.bicycle-engines.com/
the clutch and gas cable are about 3 feet short EACH!!!!!!
this really BAD!!!
now im going to go to the local bike and motorcycle shop to see if I can get a set like ASAP!! *ponders* Homedepot, Its just Tiny Metal cable.. Right?
Here is a few pics with the motor and all... (mod'ing Gas tank mount)
This is the motor with Tanny on the Mount...
now my wonderfull from http://www.bicycle-engines.com/
the clutch and gas cable are about 3 feet short EACH!!!!!!
this really BAD!!!
now im going to go to the local bike and motorcycle shop to see if I can get a set like ASAP!! *ponders* Homedepot, Its just Tiny Metal cable.. Right?
Here is a few pics with the motor and all... (mod'ing Gas tank mount)
O mr F as you said It took about a FULL hour.. as u said play and test with the gas tank to see how low it can be.... That was kinda Fun hearing the different sounds..... AS it kinda needed more gas... Im going to look sunday at the auto stores to see if I can just buy a bigger gas can so I dont need a lifter box or (thing) to raise it..
and the weld on the motor mount SUCKS gotten from http://www.bicycle-engines.com/
the weld is so close to the Beam, that I cant screw in one of the other screws, so I used ALOT of Lock tight on the other 3 bolts....
and the weld on the motor mount SUCKS gotten from http://www.bicycle-engines.com/
the weld is so close to the Beam, that I cant screw in one of the other screws, so I used ALOT of Lock tight on the other 3 bolts....
Attachments
fetor56!!! Im about to leave for work again.. .as normall.
I got the Shyhawk, on the motor, and I DID put that little, Pin on the motor shaft since it Fits so nice and TIGHT!!!, and then the clutch then the ... well I got it on nice, But its kinda Noisey.....
Its that normal, or are these things like quite, or just noisey...
my clutch and gas cable is to short but I called homedepot and they do have the wire I need so Im going to make my own, longer ones..
-Robert, PICS tmarro Morning, of the mods if I make time to get them done.
I got the Shyhawk, on the motor, and I DID put that little, Pin on the motor shaft since it Fits so nice and TIGHT!!!, and then the clutch then the ... well I got it on nice, But its kinda Noisey.....
Its that normal, or are these things like quite, or just noisey...
my clutch and gas cable is to short but I called homedepot and they do have the wire I need so Im going to make my own, longer ones..
-Robert, PICS tmarro Morning, of the mods if I make time to get them done.
F
fetor56
Guest
Robert,i realize your keen to get this project completed but don't rush....hasten slowly or you'll eff it up.
That 4th bolt for the motor mount REALLY needs to go in.File(or do whatever it takes) to get it to fit...a secure motor is ESSENTIAL.
Tranny noise is normal....after about 100mls it will quieten-down but always expect some noise.Grease the tranny,don't run it wet.
Mounting the fuel tank is going to be a problem but i'll wait for YOU to see what's available.
That 4th bolt for the motor mount REALLY needs to go in.File(or do whatever it takes) to get it to fit...a secure motor is ESSENTIAL.
Tranny noise is normal....after about 100mls it will quieten-down but always expect some noise.Grease the tranny,don't run it wet.
Mounting the fuel tank is going to be a problem but i'll wait for YOU to see what's available.
Its 232am I just got home....
Via the mount, to bolt all four bolts, I will have to Grind a Good amount off the main Beam on the mount.
The company I got my Kit from really is a joke... I cant beleave How poor of a job the workship is.
The Gear box I used Lucas Gear Lube. I was told from the auto parts store ITS the Top of the line. for what I was doing...
So I got it for right about. 10$ a Quart. USA$
Were I work the one machanic thats are welder looked at it today when I brought the motor and he LOL... He was saying the comany Didnt Line the hole's Right, Its Slightly, off center.. Not Much but Just a hair.. he told me since its a chain, Drive that its not a problem, He told me if I was using a Belt then I would have to Bondo the holes and remake them.
Since I have to MOD my cables Im going to Removed the motor once more and Try and shave the one hole... a little... Ill see how it works,
*takes a fast break* Looking for Grinding stone
.
.
Find's old box.... OMGoodness... I did find a old Grinding stone Drill bit...
OK fetor I did find this grinding BIT.... so in the am ill try and open the hole.. some... YOU know Ill be putting some EPIC PICS on this...
Till then, I hope I can sleep...
Night everyone...
Via the mount, to bolt all four bolts, I will have to Grind a Good amount off the main Beam on the mount.
The company I got my Kit from really is a joke... I cant beleave How poor of a job the workship is.
The Gear box I used Lucas Gear Lube. I was told from the auto parts store ITS the Top of the line. for what I was doing...
So I got it for right about. 10$ a Quart. USA$
Were I work the one machanic thats are welder looked at it today when I brought the motor and he LOL... He was saying the comany Didnt Line the hole's Right, Its Slightly, off center.. Not Much but Just a hair.. he told me since its a chain, Drive that its not a problem, He told me if I was using a Belt then I would have to Bondo the holes and remake them.
Since I have to MOD my cables Im going to Removed the motor once more and Try and shave the one hole... a little... Ill see how it works,
*takes a fast break* Looking for Grinding stone
.
.
Find's old box.... OMGoodness... I did find a old Grinding stone Drill bit...
OK fetor I did find this grinding BIT.... so in the am ill try and open the hole.. some... YOU know Ill be putting some EPIC PICS on this...
Till then, I hope I can sleep...
Night everyone...
