Thanks!
It's an Op cruiser from Walmart. I would stay away from the bike though. I ended up using just the frame and handle bar. Everything else is junk on the bike. The frame ain't that great either. It's light and aluminum...but you can't put a HD wheel on it. The wheel spacing is narrow. My friend and I were going to start with an electra cruiser frame that looks like this frame... we went this route cuz he wanted a new looking finish bike. He doesn't know how to paint or wrench...he's not into patina. I guess this bike is an experiment. (my second build) It turned out good and is sure the **** fun. It rips too for what it is. If you are planning to build one like this, find the frame for cheap or (I would use) the electra coaster cruiser frame. You might be able to find one in CR or just buy a new one. The electra frame is sick! Let me know if you decide to build one. :santa2:
By any chance was it this Electra frame????
Nope not the frame, this one:
Thanks!
Shot the picture at night with a cheap digital camera and used the flash. That's it, nothing crazy or any Photoshop tricks.
Great Bike.
What are your thoughts on the expansion chamber?
i have a question about the stinger on the original expansion pipe. Was it originally welded on to the pipe or was it removeable? I'm thinking of using this pipe on my bike but, I'd like to be able to run the exhaust out the back. I'm thinking that if I could "spin the little stinger" that they put on the bottom of the pipe, I'd then be able to direct it more toward the back, rather than directly down at the ground. How did you modify your pipe?
thanks!