help picking the right cruiser

ak47bulldog

New Member
Local time
7:29 PM
Joined
Mar 10, 2010
Messages
3
I am going to start a new build but have a few questions and would appriciate any help. I was going to buy a bike but I was told by a friend that I can only stick a motor on certain cruiser style bikes because he said I cant put it on a bike with a coaster brake because it wont work. any cheap bike suggestions??? I dont want to spend any more than $150. I only want to buy new unless i can find a used stretched out beach cruiser. because of location I can only order bikes, or order them and have them sent to store such as walmart. I live in cincinnati ohio. By the way I have a 2 stroke 70cc from dax. I found a schwinn landmark cruiser at walmart for $139. It is a 7 speed handbrake. will that cause problems? good bike?
 
Your friend is WRONG! I have to date built 6 bikes and all but one are coaster brake bikes. A nice and inexpensive bike is the Huffy Cranbrook sold at Wally world for less than 90 bucks! This is also one of the bikes I have built.
You have to mod the engine mounts a bit (Due to a large front tube and wide "V") and I also added a front brake and custom exhaust.
 

Attachments

  • PC120005.JPG
    PC120005.JPG
    87 KB · Views: 247
ha...wrong! my bike is a 20" schwinn stingray /lowrider with ONLY a coaster brake.
I'm using a 50 c.c. 2 stroke in the frame.
 
thanks to you all so far. I actualy ordered a cranbrook at walmart and got it but it was messed up bad from shipping or at the factory so I am kind of leaning away from huffy in general but is the coaster brake the easiest one to work with? Do you think the schwinn I mentioned would be a good choice? any suggestions on a bike with little to no moding? I also noticed a little arm thing going from the frame to the wheel that looked like it might have gotten in the way but again i am new to all of this. I need an idiot proof bike, because again not very knowledgeable about this. Also should i rinse the tank and motor out with mixed fuel b4 install?
 
i just did a search online and

zone8cycling.com

have micargi beach cruiser at $130-170 US go look

enjoy
brad :geek:
 
the "little arm thing" is the coaster brake arm. without it, the brakes will not work.
it might be close to the bolts holding the rear sprocket to the wheel so it may require you to bend it slightly for clearance.
 
If your going to use a coaster brake I would add a front brake to it for stopping power, coaster brakes dont do to well going 30 mph.
 
Landmark Cruiser

I have the Landmark from Walmart and have been very happy with it. It was $119.00 when I purchased last year. "New Out of the Box" was a basket case. Had to adjust everything on it but with that done it has been very reliable.

The only "down side" is that it is a heavy bike. With the Staton Friction drive and a R/S motor mine weighs 68# wet.

Based on pictures I have seen in this and other forums you seem to be able to mount just about any "kit" on it.

You will find the same bike with different names depending on where you purchase it. I was trying to find a used "Cruiser" on Craig's Lists but either people don't buy them or if they do, they never sell them.
 
I am going to start a new build but have a few questions and would appriciate any help. I was going to buy a bike but I was told by a friend that I can only stick a motor on certain cruiser style bikes because he said I cant put it on a bike with a coaster brake because it wont work. any cheap bike suggestions??? I dont want to spend any more than $150. I only want to buy new unless i can find a used stretched out beach cruiser. because of location I can only order bikes, or order them and have them sent to store such as walmart. I live in cincinnati ohio. By the way I have a 2 stroke 70cc from dax. I found a schwinn landmark cruiser at walmart for $139. It is a 7 speed handbrake. will that cause problems? good bike?

here is my personal choice from moir
http://www.zone8cycling.com/Regular-Cruiser-Bicycles/RCB-Pantera-7SP-p24.html 170 bux tho
good 2 sets of v brakes
7 gears
an as u can tell fits motors

brad sydney oz :geek:
 
Back
Top