I recently finished this bike. The spokes are 11ga. from Worksman powdercoated black. The front hub is dual disc from Choppers Us. I replaced the ball bearings with ceramic balls. The rims are powdercoated neon green and are Weinmann double wall 1.5" I believe. The tires are 3". The front end is from Choppers US and I powder coated it black along with the handlebars. The rear hub is a Worksman alloy drum brake. I removed the brake and had a disc hub machined to fit inside the drum. The disc brake is an Avid BB7 with a 180mm rotor. I added the bracket on the outside of the brake to keep it from twisting in the dropout.
I removed the seat post tube but the bracket for the jackshaft adds strength back to the frame.
I shortened the shifter to let me up shift with my heel while on the bike pedal To downshift I have to move my foot back to the rear of the shifter arm, works out well.
The ride is good on this bike. It is eight feet long overall.
I have ridden about 100 miles on it. Been 56mph tops so far.
Attached Thumbnails
I removed the seat post tube but the bracket for the jackshaft adds strength back to the frame.
I shortened the shifter to let me up shift with my heel while on the bike pedal To downshift I have to move my foot back to the rear of the shifter arm, works out well.
The ride is good on this bike. It is eight feet long overall.
I have ridden about 100 miles on it. Been 56mph tops so far.
Attached Thumbnails