motorpsycho
Active Member
so from what it sounds like you may have a "speed" or "cns" style carb with the chole plunger thing on top.
I think that it's more of an air bleed than a choke, but it kind of works the same as a choke,
when you do take the top of the carb off, there will be a couple of springs in there...don't worry the choke and throttle cable run through them so they won't go flying.
if you do have this cns style carb, i'm pretty sure that the slide will have those slots in it and the pin inside the carb to line the slide up with. make sure that the slide moves up & down freely. when you pull the cable out to pull the slide out it should slide up & out very smoothly and easily and not be sloppy or binding up.
this problem is just a gues on my part, but by what you're describing, it sure sounds like this is the problem.
what name is on the side of your carb anyway?
I think that it's more of an air bleed than a choke, but it kind of works the same as a choke,
when you do take the top of the carb off, there will be a couple of springs in there...don't worry the choke and throttle cable run through them so they won't go flying.
if you do have this cns style carb, i'm pretty sure that the slide will have those slots in it and the pin inside the carb to line the slide up with. make sure that the slide moves up & down freely. when you pull the cable out to pull the slide out it should slide up & out very smoothly and easily and not be sloppy or binding up.
this problem is just a gues on my part, but by what you're describing, it sure sounds like this is the problem.
what name is on the side of your carb anyway?