motorcycle light hook-up??????

ok paralell mean this lets say you have to 11.1 volt batts and they are rated at 2200 mah you run a paralell connector and you still have 11.1 volts but your mah would double to 4400 mah in turn would double your run time and in turn make your lite briter with out blowing the bulb we use them in radio controlled vehicles alot i in airplanes lets sai with one pack i can fly 10 minutes with 2 packs i can fly 20 or minutes in paralell and have more power.
 
paralell means that when you use to battery packs together you keep the same voltage but it will last longer than a single pack like this 11.1 pack at 2200 mah add another pack to it same voltage and mah instead of having 22.2 volts you will have 11.1 volts and 4400 mah which is double the power you had before and last 2 times and maybe 3 times as long as a single pack hope that helps
 
Just clarification

Parallel ( "|" = a wire ) 0=empty space (editing reasons)

+ [12v] - 10ah
|000000|
+ [12v] - 10ah
|000000|
|000000|
|=00000|
+ [12v] - 20ah total

Series

+[12v] - 10ah
|00000|_______________ ( Negative "-" Cable)
|
-[12v] + 10 ah
000000|_______________ (Positive "+" Cable)

Above equals 24v (volts) at 10ah (amp hours)


Hope this helps clear things up a little

NEVER WHEN RUNNING IN SERIES CONNECT BOTH CABLES TO BOTH BATTERIES YOU SHOULD ALWAYS HAVE 1 CABLE CONNECTING THE 2 BATTERIES +TO - AND ON EACH BATTERY THE ONE THAT IS NOT LINKED TO THE OTHER BATTERY SHOULD BE FREE I.E LEFT BATT IS LINKED TO OTHER BATTERY ON THE POSITIVE SIDE THIS MEANS THE NEGATIVE TERMINAL OF THIS BATTERY SHOULD BE "FREE" OR ON YOUR 24V LOAD AS THE NEGATIVE INPUT AND THE RIGHT SIDE WOULD BE THE OPPOSITE
Should you screw this part up you will find out very soon Please be careful around boxes filled with explosive gasses, acid, lead and all things deadly!
 
Last edited by a moderator:
Just clarification

Parallel ( "|" = a wire ) 0=empty space (editing reasons)

+ [12v] - 10ah
|000000|
+ [12v] - 10ah
|000000|
|000000|
|=00000|
+ [12v] - 20ah total

Series

+[12v] - 10ah
|00000|_______________ ( Negative "-" Cable)
|
-[12v] + 10 ah
000000|_______________ (Positive "+" Cable)

Above equals 24v (volts) at 10ah (amp hours)


Hope this helps clear things up a little

NEVER WHEN RUNNING IN SERIES CONNECT BOTH CABLES TO BOTH BATTERIES YOU SHOULD ALWAYS HAVE 1 CABLE CONNECTING THE 2 BATTERIES +TO - AND ON EACH BATTERY THE ONE THAT IS NOT LINKED TO THE OTHER BATTERY SHOULD BE FREE I.E LEFT BATT IS LINKED TO OTHER BATTERY ON THE POSITIVE SIDE THIS MEANS THE NEGATIVE TERMINAL OF THIS BATTERY SHOULD BE "FREE" OR ON YOUR 24V LOAD AS THE NEGATIVE INPUT AND THE RIGHT SIDE WOULD BE THE OPPOSITE
Should you screw this part up you will find out very soon Please be careful around boxes filled with explosive gasses, acid, lead and all things deadly!

You lost me. Who is this post in response to?
 
Dude just read the 8 posts and it will become clear...

Dude....sorry after reading agin i still do not get your !0000001 stuff. Your post is confusing me. All I asked was specifically what you were responding to. 8 posts? Does that show up as two pages for you?

Also Dude.......You might keep in mind that you already circumvented the rules and talking that way does not help. I told you that you have my attention.

Now please try again to simplify what you are saying. The open part throws me. Some of us deal with voltages and amps that actually cross open paths.
 
Just clarification

Parallel ( "|" = a wire ) 0=empty space (editing reasons)

+ [12v] - 10ah
|000000|
+ [12v] - 10ah
|000000|
|000000|
|=00000|
+ [12v] - 20ah total

Series

+[12v] - 10ah
|00000|_______________ ( Negative "-" Cable)
|
-[12v] + 10 ah
000000|_______________ (Positive "+" Cable)

Above equals 24v (volts) at 10ah (amp hours)


Hope this helps clear things up a little

This part has me wondering what the heck your saying.......Dude.
 
how about scavaging an old cordless dril and useing batt and charger that way you cuold carry extra batt and switching them wold be a snap
 
Back
Top