Carby Wanted: Picture of a HT with billet intake and CNS carb

[Al.Fisherman]

I need to build a clutch roller bracket. I would like a picture from the left side much like this picture. This shows a NT, but want one with a CNS.
Thanks
Ron

 

[bmoney]

Here's my CNS carb mounted on a billet intake from pirate cycles..
I know you were looking for a left side pic but this was the only clear close up i had. Hope it helps

 

[Al.Fisherman]

Thank you, but what I really need is a picture shot like this from the left side at the same level, but it's better then nothing. Can work with it if I have too. Thank you.
Ron

 

[SdCruizer]

I have the cns with the other type filter
just the whole carb itself is like 5 inches wide if that helps any
I think the stock is around 3 inches

if you need one of those offset intakes instead I have a unused one

 

[Al.Fisherman]

I have the cns with the other type filter
just the whole carb itself is like 5 inches wide if that helps any
I think the stock is around 3 inches

if you need one of those offset intakes instead I have a unused one

Don't need one TY. Have a customer that I'm making a part for. He has a HT, billet intake and a CNS carb. Need profile photo from the left side, like what I posted.

 

[bmoney]

Still not as strait as yours but its in the ball park.

 

[Al.Fisherman]

Thank you very much, that's what I was looking for. Yes not a straight on shot, but can work with that.

 

[bmoney]

Welcome, Glad I could help!

 

[vermhot]

javascript:void(0);

 

[vermhot]

http://s1187.photobucket.com/albums/z391/vermhot/Snapbucket/