The pulley on the EZM Q-Matic drive's centrifugal clutch specifies and nicely accepts a #41 chain. I have a hub-mounted 56-tooth sprocket on my rear wheel, and that sprocket's teeth are much thinner than those on the clutch. So my #41 chain can move somewhat from side-to-side on the big sprocket. (The two sprockets and the chain are ½-inch pitch.)
Does anybody here know of a source for a 56-tooth, ½" pitch sprocket that's specifically sized for #41 chain? I can't seem to find one. I feel that having the #41 chain running on a properly-sized final sprocket would be preferable to my current thin sprocket.
Does anybody here know of a source for a 56-tooth, ½" pitch sprocket that's specifically sized for #41 chain? I can't seem to find one. I feel that having the #41 chain running on a properly-sized final sprocket would be preferable to my current thin sprocket.
Last edited by a moderator: