snarlofdisgust
New Member
- Local time
- 5:19 AM
- Joined
- Nov 14, 2012
- Messages
- 21
So, I've been having a problem keeping the chain on the bike. First I thought it was the tensioner so I bought the best one I could find.
http://www.piratecycles1.com/picysplochte.html
Everything was good for about ten miles, then the chain came off again. Not sure if it was the master link or what is going on exactly.
I have the clutch sprocket and the drive sprocket (freewheel) lined up pretty good, but noticed if I spin the rear tire the freewheel moves back and forth a bit, at max maybe 1/8 of an inch. This seems like a big deal to me, and I believe is the reason the chain is being thrown.
Can this be corrected? I have the stock rear end that presses over the spokes.
Thanks
http://www.piratecycles1.com/picysplochte.html
Everything was good for about ten miles, then the chain came off again. Not sure if it was the master link or what is going on exactly.
I have the clutch sprocket and the drive sprocket (freewheel) lined up pretty good, but noticed if I spin the rear tire the freewheel moves back and forth a bit, at max maybe 1/8 of an inch. This seems like a big deal to me, and I believe is the reason the chain is being thrown.
Can this be corrected? I have the stock rear end that presses over the spokes.
Thanks