akacree
New Member
Hello all. I could use some engine identification help. The engine ID photo that's on many sites had me thinking I had a 55cc, based on the squareness of the head & the cooling fins.. but after pulling off & measuring the head, cylinder body & piston, it seems I may have a 66cc. Here's what I know:
I am in desparate need of a gasket kit for this engine, but not sure which to order.. Do you know what engine I have? Seems from the nearly 47mm bore piston, that it has to be a 66cc, but I don't know how to ID with any of the other parameters.
I thank you, in advance, for your time & expertise.
- The piston diameter is approx 46.8mm.
- The cylinder diameter (from wall to wall) is approx 48.5mm.
- It uses 10mm nuts to bolt down the head & body.
- The spacing between the mounting holes on the head & body are approx 1.75" or 44.5mm.
I am in desparate need of a gasket kit for this engine, but not sure which to order.. Do you know what engine I have? Seems from the nearly 47mm bore piston, that it has to be a 66cc, but I don't know how to ID with any of the other parameters.
I thank you, in advance, for your time & expertise.