Looking for an engine for my Bike

Fatandre

New Member
Local time
6:30 PM
Joined
Nov 28, 2013
Messages
22
Location
Poland
I own a beach cruiser and would want an engine for it in the frame.
Fast and reliable.
What would be best?
 
Welcome to the forum. Seems like the Russian "D" series motors would work well if you can find one in Ploand. Beach cruiser frames have plenty of room for mounting a 66cc 2 stroke or 49cc HS four stroke. Either should work well for you.
 

Kit Includes:

Your choice of 5.3cc, 6.0cc or 7.2cc center fire billet Stage 2 cylinder head w/extra-tall nuts & flat washers *see note below
1 Stage 2 hand ported cylinder body (69.5mm face-to-face length)
1 Special intake manifold plenum with 3/4" spigot (fitted and port matched to cylinder body)
1 Modified high-performance (Type-A) piston with rings
1 Wrist pin set
2 Top and 2 bottom gaskets
NGK B8HS spark plug
where you going to get the rest of the motor/kit from????
 
Kit Includes:

Your choice of 5.3cc, 6.0cc or 7.2cc center fire billet Stage 2 cylinder head w/extra-tall nuts & flat washers *see note below
1 Stage 2 hand ported cylinder body (69.5mm face-to-face length)
1 Special intake manifold plenum with 3/4" spigot (fitted and port matched to cylinder body)
1 Modified high-performance (Type-A) piston with rings
1 Wrist pin set
2 Top and 2 bottom gaskets
NGK B8HS spark plug
where you going to get the rest of the motor/kit from????

Thats something I was something I was hoping you would help me with.
 
this type of motor is the cheapest POS made you can buy
You would be much better off building a small 4stroke powered Bike from what is available to you locally
 
To me, the four stroke is better if you ride every day, because you don't need to mix petro and oil. If you only ride a few days a week, mixing gas and oil is not as much of a hassle and the cheaper 2 stroke will work fine.
 
Last edited:
Back
Top